The Most Powerful Contractor Marketing Weapon

by Shana Fong on January 21, 2011
TAGGED WITH 

(Hint: You Already Own It)

Source: ACCA

An old saying states that people don’t care how much you know until they know how much you care. Don’t let your familiarity with the saying make you numb to its far-reaching business power.

Like many of you, we’ve been involved in numerous contracting projects over the years. We’ve built a home, renovated six buildings, and hired for all sorts of projects from retiling to roofs to remodeling a kitchen. We’ve had some go wrong, such as the sheetrock job that looked like a drunken rhinoceros careened off every wall. We also had a tile setter mix boxes of tile mid-job, creating a really nice two-tone effect that he defended as stylish. Thankfully, these miscues are in the minority.

The majority of the contractors have been exceptional. Yet there’s one trait among even the good ones that causes their rehire rate to be barely higher than that of the rotten ones. This mistake totally short circuits future calls and referrals, and it’s costing you a fortune, even though the power to correct it exists in your company, right now, today.

The mistake is ignoring the relationship.

See, a bad contractor (whether he knows he’s bad or not) doesn’t get a callback or referrals due to poor work. And a good contractor most often doesn’t get a callback or referrals because of inattention to his customers. Same result, for entirely different reasons.

Out Of Sight, Out Of Mind
Think of your past friends and relationships. The most common reason they’re in the past and not the present is you fell out of touch. You might have even been a good friend with much in common, yet if not in touch, you’re not on the friend list. There are even figures to back this up. According to a Good Housekeeping survey of those who purchased from contractors:

  • Thirty-seven percent said the relationship was the most important reason.
  • Twenty-two percent said it was because you stayed in touch after a previous purchase.
  • Fourteen percent were referred by a friend or family member.

Add those up, and 73 percent of your sales have some relationship tie-in.

Unfortunately, most contractors just service them, bill them, and hope for the best.

So, how do you rank in terms of customer relations and retention?

With minimum retention efforts, you get a call, and it’s answered by the nearest minimally trained receptionist. You schedule, show up, do the work, present the invoice, then go home. No follow-up is attempted. You assume, “If they need me, they know how to reach me.” Unless you live in a town with exactly one contractor, good luck.

With average retention efforts, your call handling quality is dependent upon who answers. You deliver what you consider fair — no more, no less. Techs are intermittently trained. Some customers get an agreement offer, some don’t. Your CSR may make a call-behind or send a thank you note, but this is not systemized. Newsletters and follow-up range from spotty to nonexistent. You dabble with improvement but with little lasting change. Customers feel the inconsistency and migrate away. Repeat calls and referrals suffer miserably.

With maximum retention efforts, you categorize poorly trained employees as unethical business. You answer the phones consistently and make consistent high-quality presentations. Follow-up is automatic, starting with happy calls and a thank you card that contains a referral request. Seasonal newsletters go out like clockwork. Your website, value-building ads, forms, and leave-behinds are not purely sales pieces (though they boost prices and closing ratios) but educational customer-awareness tools. Customers get outbound messages from you — online and offline — eight to 14 times per year.

If you’re in the maximum category, congratulations. You also probably dominate your market and not by coincidence. Yet for the others, don’t make this too hard. Start simply with two things:

  1. The thank you note and call. Even the most basic thank you note (automatically generated and about 45 cents worth of effort) tells customers they’re valuable. It’s so easy to do and so easy not to do. Most choose the latter.
  2. A newsletter. Since thank you notes are transaction based (and thus sporadic or potentially forgotten between visits), you must have at least one calendar-based item. A quality newsletter sent out two to four times a year will position your company branding as different from perhaps 90 percent of the other contractors in town. That’s an incredible advantage for not much money.

Start where you can. Your customers, company, and profits deserve the boost.

Recurve Software Approved for Northern Virginia Home Performance with ENERGY STAR Pilot

by Shana Fong on January 11, 2011
TAGGED WITH 

Recurve Software has been approved for use in North Virginia’s Home Performance with ENERGY STAR pilot program. This program represents a new approach by the Department of Energy and the Environmental Protection Agency to work directly with home performance contractors, cutting down on program implementation and administrative costs.

For more information on the NoVa Home Performance with ENERGY STAR program, check out their website.

VP Biden Announces Home Energy Score Program

by Shana Fong on November 12, 2010

With the new Home Energy Score, consumers will find out how their home compares with others and how much money they could save by adding insulation, sealing air leaks or doing other upgrades. Ten U.S. communities will test the score, similar to a miles-per-gallon label for cars, before it’s rolled out nationally next summer.

“Together, these programs will grow the home retrofit industry and help middle-class families save money and energy,” says Vice President Biden

The program is designed to encourage homeowners to make energy-saving upgrades and to jump-start the industry for home energy retrofits, Biden said in a statement. It will also include financing for homeowners (up to $25,000) and software that will let energy contractors give consumers the home efficiency equivalent of miles per gallon for cars.

Sources:
CNET
USA Today

Where Does Your Money Go?

by Shana Fong on September 29, 2010

The average yearly energy bill for a typical single-family home is $2,200. Where does it all go?

Source: Energy Star

Recurve Named to Prestigious Inc 5000

by Shana Fong on September 21, 2010

The results are in: we are honored to be named to the Inc. 5000 list, ranking #24 in Top Energy Companies, #39 in San Francisco, and #682 overall.

The Inc. 5000 list was based on revenue growth from 2006 to 2009 and had to meet certain qualifications, such as being privately held and for-profit.

Perhaps as a harbinger of things to come, Inc. Magazine remarks about their list:

More encouraging are the companies sprouting in industries such as health (32, compared with 15 in 2000), energy (16, compared with three in 2000), and education (six, compared with one in 2000). These sectors represent teeth-grindingly tough issues, on which entrepreneurial zeal and fresh thinking are sorely needed.

Americans Don’t Know Jack About Saving Energy

by Shana Fong on August 19, 2010

In this illuminating post by Grist, we learn through a recent survey by The Earth Institute at Columbia University that Americans really don’t know jack about saving energy.

The largest group, nearly 20 percent, cited turning off lights as the best approach—an action that affects energy budgets relatively little. Very few cited buying decisions that experts say would cut U.S. energy consumption dramatically, such as more efficient cars (cited by only 2.8 percent), more efficient appliances (cited by 3.2 percent) or weatherizing homes (cited by 2.1 percent).

About 2.8 percent of those responding said they could save energy by sleeping or relaxing more, compared with 2.1 percent who said they could do so by insulating their homes (can you guess which is actually more effective?).

Jonathan Hiskes of Grist asserts:

The theme of the confusion was that participants tended to name steps that involved doing less or using less of things — turning off lights, turning down thermostats — rather than solutions that allow them to get the same amount of light and heat through less energy (via insulation and LED bulbs). That gets at a key difference between conservation and efficiency. The first means using less; the second means getting the same results through more intelligent use of resources. Both have a place, but it’s a problem if people understand all of efficiency as “sacrifice.” A home retrofit that cuts $500 off your heating bills for the year isn’t a sacrifice — it’s a financial and environmental win.

Furnace Oversizing Facts

by Trey Muffet on August 16, 2010

Oversizing of mechanical equipment has been a standard of installation for many years, but thanks to a growing emphasis on building efficiency and home performance, oversizing is (hopefully) seeing the end of its days.

Common reasons for oversizing include failure to perform the proper load calculations; compensating for leaky ducts; or contractors protecting themselves from callbacks during extreme weather. Whatever the reason, oversizing is always a no no—even for high-efficiency equipment. But there are many misconceptions floating around about why oversizing is bad, and many people lack a clear understanding of what’s really at stake.

Recent studies show that furnaces with an Annual Fuel Utilization Efficiency (AFUE) rating above 0.75 can be sized up to five times the load without a significant drop in efficiency. (Keep in mind, however, that the average load throughout the year is much lower than peak loads calculated by Manual J.) For example, let’s look at a 95% two-stage furnace. In second stage, the 60,000 BTU/h furnace will operate at steady state 95% efficiency when loads reach as low as 12,000 BTU/h. First-stage capacity of 39,000 BTU/h can operate efficiently for loads as low as 7,800 BTU/h.

Though efficiency may not be affected by oversizing, here are a few reasons why oversizing is still an issue:

1. Furnace prices increases with size, so installing the smallest possible unit will reduce the initial cost.
2. A furnace that is too large for the home will cycle on an off frequently, making the home less comfortable than an appropriately sized furnace.
3. Temperature swings from cycling may cause the homeowner to turn up the thermostat, which will result in higher energy bills.
4. Incorrect sizing can put stress on the system and shorten equipment life.

The bottom line: Sealing leaky ducts and using load calculations to choose the smallest possible furnace will assure maximum comfort and efficiency for your customers.

Home Performance 101 – How Well Do You Know Your Home?

by Daniel Bell on August 13, 2010

The first in the Green Footprint series, Home Performance 101 focuses on your home as a system and presents ways to cost-effectively improve your home’s energy efficiency.

This video features one of Recurve’s Home Performance Specialists, Daniel Bell.

Green Footprint: Home Performance 101 from Foster City TV on Vimeo.

ACI 2011 is coming to San Francisco

by Shana Fong on August 2, 2010
TAGGED WITH 

Plans are starting to take shape for the next ACI National Home Performance Conference. This time, it will be held in Recurve’s hometown, San Francisco, from March 28 – April 1, 2011.

The 2010 conference in Austin was proof that the time has come for the home performance industry. Click this link to stay up to date on the conference so you don’t miss out on all the amazing educational and networking opportunities this event will offer.

« Newer Posts