6 Easy Weekend Winterization Projects

by Shana Fong on October 18, 2010

Winter is just around the corner – time to think about how you can button up your house to make sure it’s comfortable without costing you a fortune in energy bills. The Daily Green has put together a great list of easy weekend projects to help you winterize your home.

  1. Dodge the Draft(s)
    According to the U.S. Department of Energy, drafts can waste 5% to 30% of your energy use. Start simple and adopt that old Great Depression fixture — the draft snake, which you can easily make yourself. Just place a rolled bath towel under a drafty door, or make a more attractive DIY draft snake.
  2. Change Furnace Filters
    Yes it’s easy to forget, but it’s important to replace or clean furnace filters once a month during the heating season. Dirty filters restrict airflow and increase energy demand. Here’s a worry-saving tip: mark a monthly check on your calendar.
    Better, consider switching to a permanent filter, which will reduce waste and hassle. Did you know that disposable fiberglass filters trap a measly 10 to 40% of debris? Electostatic filters trap around 88%, and are much better at controlling the bacteria, mold, viruses and pollen that cause illness and irritation.
  3. Run Fans in Reverse
    Most people think of fans only when they want to be cool, but many ceiling units come with a handy switch that reverses the direction of the blades. Counterclockwise rotation produces cooling breezes while switching to clockwise makes it warmer: air pooled near the ceiling is circulated back into the living space – cutting your heating costs as much as 10%!
  4. Turn Down Your Water Heater
    While many conventional water heaters are set to 140 degrees F by installers, most households don’t need that much steam, and end up paying for it — in dollars and the occasional scalding burn. Lowering the temperature to 120 degrees F (or lower) would reduce your water heating costs by 6% to 10%.
  5. Give Your Heating System a Tune-Up
    You probably already know that cars need periodic tune-ups in order to run their best. Well the same is true for heating equipment. Keeping your furnace clean, lubricated and properly adjusted will reduce energy use, saving up to 5% of heating costs.
    If your entire furnace is in need of replacement, it will cost a lot more — but replacing an inefficient burner for a modern machine will save you every month through the heating season. Be sure to take advantage of federal tax credits for new furnaces, which can cover 30% of the cost, up to $1,500.
  6. Mind That Thermostat
    It’s easy to forget to turn down the heat when you leave the building, but doing so is one of the surest ways to save money. Most households shell out 50 to 70% of their energy budgets on heating and cooling, so why pay for what no one uses?
    For every degree you lower the thermostat during heating season, you’ll save between 1 and 3% of your heating bill. Make it easier with a programmable thermostat; they are widely available for as little as $50, and the average family will save $180 a year with one.

For even higher impact on your home’s comfort and energy bills, contact Recurve so we can provide expertise on projects such as:

  • Air sealing – simple leaks can sap home energy efficiency by 5% to 30% a year, according to the U.S. Department of Energy.
  • Insulation – it may not seem sexy, but insulation is one of the best ways to save energy and money at home.
  • Duct sealing – studies show 10% to 30% of heated (or cooled) air in an average system escapes from ducts. Properly sealing ducts can save the average home up to $140 annually, according to the American Solar Energy Society.
  • Upgrade to an efficient furnace – if your furnace is old, you could save a lot of money in the long run (and improve your home’s value) by upgrading to a new unit.

An Illuminating Statistic on Fuel

by Shana Fong on February 2, 2010
TAGGED WITH 

As originally reported by The Thin Green Line, for every unit of fuel burned, only 13 percent of the potential energy is actually converted as useable output to power machines, and illuminate and heat buildings.

That means that 87% of the energy produced by fuel is wasted.

Who thinks it’s time to move to more efficient sources of energy?